{"title":"Resin Molds","description":"","products":[{"product_id":"15-x-11x-1-25-oval-charcuterie-board-silicone-mold-serving-board-mold","title":"15\" x 11\"x 1.25\" Oval Charcuterie Board Silicone Mold - Serving Board Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eTall: 15\"\u003cbr\u003eWidth: 11\"\u003cbr\u003eDeep: 1.25\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Template\u003c\/strong\u003e: Exact size of final casting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinal Cut Template\u003c\/strong\u003e: 1\/8\" undersized to trim excess resin.\u003c\/p\u003e\n\u003cp\u003eThis listing is for an Oval Charcuterie Board Silicone Mold with dual embedded handles.\u003c\/p\u003e\n\u003cp\u003eThis listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.\u003c\/p\u003e\n\u003cp\u003eThese versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.\u003c\/p\u003e\n\u003cp\u003eThe final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Silicone Mold","offer_id":47622563725531,"sku":"OVALCHARCUT","price":105.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Template","offer_id":47622563758299,"sku":"OVALACRYLIC","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Final Cut Acrylic Template (1\/8\" Undersized)","offer_id":47622563791067,"sku":"F.C.OVALACRYLIC","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/Oval_charcuterie_shopify.png?v=1758567632"},{"product_id":"12-round-x-1-25-romeo-juliet-serving-board-set-silicone-mold-nesting-serving-board-mold","title":"12\" Round x 1.25\" Romeo \u0026 Juliet Serving Board Set Silicone Mold - Nesting Serving Board Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eEach half is approximately 13\" x 6\"\u003cbr\u003eDeep: 1.25\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Template\u003c\/strong\u003e: Exact size of final casting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinal Cut Template\u003c\/strong\u003e: 1\/8\" undersized to trim excess resin.\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Round Romeo \u0026amp; Juliet Serving Board Set Silicone Mold. This one mold will produce 2 pieces which will nest together perfectly. \u003c\/p\u003e\n\u003cp\u003eThis listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.\u003c\/p\u003e\n\u003cp\u003eThese versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.\u003c\/p\u003e\n\u003cp\u003eThe final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Silicone Mold","offer_id":47622562709723,"sku":"NESTINGROUND","price":95.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Template","offer_id":47622562742491,"sku":"NESTINGROUNDACRYLIC","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Final Cut Acrylic Template (1\/8\" Undersized)","offer_id":47622562775259,"sku":"F.C.NESTINGROUNDACRYLIC","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/Nesting_round.png?v=1758567632"},{"product_id":"14-6-x-12x-1-25-teardrop-charcuterie-board-silicone-mold-serving-board-mold","title":"14.6\" x 12\"x 1.25\" Teardrop Charcuterie Board Silicone Mold - Serving Board Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eTall: 14.6\"\u003cbr\u003eWidth: 12\"\u003cbr\u003eDeep: 1.25\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Template\u003c\/strong\u003e: Exact size of final casting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinal Cut Template\u003c\/strong\u003e: 1\/8\" undersized to trim excess resin.\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Teardrop Charcuterie Board Silicone Mold. This mold has an embedded round handle hole at the top of the teardrop.\u003c\/p\u003e\n\u003cp\u003eThis listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.\u003c\/p\u003e\n\u003cp\u003eThese versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.\u003c\/p\u003e\n\u003cp\u003eThe final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Silicone Mold","offer_id":47622563922139,"sku":"TEARDROPCHARCUT","price":95.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Template","offer_id":47622563954907,"sku":"TEARDROPACRYLIC","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Final Cut Acrylic Template (1\/8\" Undersized)","offer_id":47622563987675,"sku":"F.C.TEARDROPACRYLIC","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/teardrop_charcuterie.png?v=1758567632"},{"product_id":"17-x-14-x-1-25-romeo-juliet-nesting-heart-serving-board-set-silicone-mold-nesting-charcuterie-mold","title":"17\" X 14\" x 1.25\" Romeo \u0026 Juliet Nesting Heart Serving Board Set Silicone Mold - Nesting Charcuterie Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize Together:\u003c\/strong\u003e 17\" X 14\" X 1.25\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTall Half:\u003c\/strong\u003e 17\" x 6.5\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShort Half: \u003c\/strong\u003e14.6\" x 7.5\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e: 1.25\"\u003cbr\u003e\u003cstrong\u003eSurface Finish:\u003c\/strong\u003e Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Template\u003c\/strong\u003e: Exact size of final casting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinal Cut Template\u003c\/strong\u003e: 1\/8\" undersized to trim excess resin.\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Romeo \u0026amp; Juliet Serving Board Set Silicone Mold that has a cutout heart in the center of it. This one mold will produce 2 pieces which will nest together perfectly. \u003c\/p\u003e\n\u003cp\u003eThis listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.\u003c\/p\u003e\n\u003cp\u003eThese versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.\u003c\/p\u003e\n\u003cp\u003eThe final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Silicone Mold","offer_id":47622562840795,"sku":"NESTINGHEART","price":135.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Template","offer_id":47622562873563,"sku":"NESTINGHEARTACRYLIC","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Final Cut Acrylic Template (1\/8\" Undersized)","offer_id":47622562906331,"sku":"F.C.NESTINGHEARTACRYLIC","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/RJ_Nesting_Heart_Charcut.png?v=1758567631"},{"product_id":"17-x-17-5-x-1-25-romeo-juliet-nesting-serving-board-set-silicone-mold-nesting-charcuterie-mold","title":"17\" X 17.5\" x 1.25\" Romeo \u0026 Juliet Nesting Serving Board Set Silicone Mold - Nesting Charcuterie Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSize Together:\u003c\/strong\u003e 17\" X 17.5\" X 1.25\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTall Half:\u003c\/strong\u003e 17\" x 9\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eShort Half: \u003c\/strong\u003e13.5\" x 8.5\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDepth\u003c\/strong\u003e: 1.25\"\u003cbr\u003e\u003cstrong\u003eSurface Finish:\u003c\/strong\u003e Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Template\u003c\/strong\u003e: Exact size of final casting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinal Cut Template\u003c\/strong\u003e: 1\/8\" undersized to trim excess resin.\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Romeo \u0026amp; Juliet Serving Board Set Silicone Mold. This one mold will produce 2 pieces which will nest together perfectly. \u003c\/p\u003e\n\u003cp\u003eThis listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.\u003c\/p\u003e\n\u003cp\u003eThese versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.\u003c\/p\u003e\n\u003cp\u003eThe final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Silicone Mold","offer_id":47622563037403,"sku":"NESTINGRECTANGLE","price":135.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Template","offer_id":47622563070171,"sku":"NESTINGRECTANGLEACRYLIC","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Final Cut Acrylic Template (1\/8\" Undersized)","offer_id":47622563102939,"sku":"F.C.NESTINGRECTANGLEACRYLIC","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/NESTING_rectangle_mold.png?v=1758567632"},{"product_id":"16x-12x-1-25-chunky-bowed-rectangle-board-silicone-mold-dual-handles","title":"16\"x 12\"x 1.25\" Chunky Bowed Rectangle Board Silicone Mold, Dual Handles","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eTall: 16\"\u003cbr\u003eWidth: 12\"\u003cbr\u003eDeep: 1.25\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Template\u003c\/strong\u003e: Exact size of final casting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinal Cut Template\u003c\/strong\u003e: 1\/8\" undersized to trim excess resin.\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Chunky Bowed Rectangle with dual handles Charcuterie Board Mold.\u003c\/p\u003e\n\u003cp\u003eThis listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.\u003c\/p\u003e\n\u003cp\u003eThese versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.\u003c\/p\u003e\n\u003cp\u003eThe final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Silicone Mold","offer_id":47622563528923,"sku":"CHUNKYBOWED","price":110.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Template","offer_id":47622563561691,"sku":"CHUNKYBOWEDACRYLIC","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Final Cut Acrylic Template (1\/8\" Undersized)","offer_id":47622563594459,"sku":"F.C.CHUNKYBOWEDACRYLIC","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/CHUNKY_BOWED_mold.png?v=1758567631"},{"product_id":"12x-6-5x-1-25-beer-can-cheese-board-silicone-mold-board-mold-soda-can-mold","title":"12\"x 6.5\"x 1.25\" Beer Can Cheese Board Silicone Mold - Board Mold, Soda Can Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eTall: 12\"\u003cbr\u003eWidth: 6.5\"\u003cbr\u003eDeep: 1.25\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Template\u003c\/strong\u003e: Exact size of final casting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinal Cut Template\u003c\/strong\u003e: 1\/8\" undersized to trim excess resin.\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Beer Can Board Silicone Mold. So many options with this mold.  It can be used as a cheese board or also as wall decor.  \u003c\/p\u003e\n\u003cp\u003eThis listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.\u003c\/p\u003e\n\u003cp\u003eThese versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.\u003c\/p\u003e\n\u003cp\u003eThe final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Silicone Mold","offer_id":47622563135707,"sku":"BEERCAN","price":70.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Template","offer_id":47622563168475,"sku":"BEERCANACRYLIC","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Final Cut Acrylic Template (1\/8\" Undersized)","offer_id":47622563201243,"sku":"F.C.BEERCANACRYLIC","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/Beer_Can_charcuterie.png?v=1758567631"},{"product_id":"17x-4x-1-25-beer-bottle-cheese-board-silicone-mold-board-mold-bottle-mold","title":"17\"x 4\"x 1.25\" Beer Bottle Cheese Board Silicone Mold - Board Mold, Bottle Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eTall: 17\"\u003cbr\u003eWidth: 4\"\u003cbr\u003eDeep: 1.25\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Template\u003c\/strong\u003e: Exact size of final casting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinal Cut Template\u003c\/strong\u003e: 1\/8\" undersized to trim excess resin.\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Beer Bottle Board Silicone Mold. So many options with this mold.  It can be used as a cheese board or also as wall decor.  \u003c\/p\u003e\n\u003cp\u003eThis listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.\u003c\/p\u003e\n\u003cp\u003eThese versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.\u003c\/p\u003e\n\u003cp\u003eThe final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Silicone Mold","offer_id":47622563234011,"sku":"BEERBOTTLE","price":70.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Template","offer_id":47622563266779,"sku":"BEERBOTTLEACRYLIC","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Final Cut Acrylic Template (1\/8\" Undersized)","offer_id":47622563299547,"sku":"F.C.BEERBOTTLEACRYLIC","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/Beer_Bottle_charcuterie.png?v=1758567631"},{"product_id":"17x-6-5x-1-25-fishtail-cheese-board-silicone-mold-charcuterie-board-mold","title":"17\"x 6.5\"x 1.25\" Fishtail Cheese Board Silicone Mold - Charcuterie Board Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eTall: 17\"\u003cbr\u003eWidth: 6.5\"\u003cbr\u003eDeep: 1.25\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Template\u003c\/strong\u003e: Exact size of final casting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinal Cut Template\u003c\/strong\u003e: 1\/8\" undersized to trim excess resin.\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Fishtail Charcuterie Board Silicone Mold.\u003c\/p\u003e\n\u003cp\u003eThis listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.\u003c\/p\u003e\n\u003cp\u003eThese versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.\u003c\/p\u003e\n\u003cp\u003eThe final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Silicone Mold","offer_id":47622562939099,"sku":"FISHTAILCHARCUT","price":95.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Template","offer_id":47622562971867,"sku":"FISHTAILACRYLIC","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Final Cut Acrylic Template (1\/8\" Undersized)","offer_id":47622563004635,"sku":"F.C.FISHTAILACRYLIC","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/fishtail_charcuterie.png?v=1758567631"},{"product_id":"14x-8-25x-1-25-genie-cheese-board-silicone-mold-charcuterie-board-mold","title":"14\"x 8.25\"x 1.25\" Genie Cheese Board Silicone Mold - Charcuterie Board Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eTall: 14\"\u003cbr\u003eWidth: 8.25\"\u003cbr\u003eDeep: 1.25\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Template\u003c\/strong\u003e: Exact size of final casting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinal Cut Template\u003c\/strong\u003e: 1\/8\" undersized to trim excess resin.\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Genie Charcuterie Board Silicone Mold or Cheese Board Mold.\u003c\/p\u003e\n\u003cp\u003eThis listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.\u003c\/p\u003e\n\u003cp\u003eThese versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.\u003c\/p\u003e\n\u003cp\u003eThe final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Silicone Mold","offer_id":47622563430619,"sku":"GENIECHARCUT","price":95.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Template","offer_id":47622563463387,"sku":"GENIEACRYLIC","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Final Cut Acrylic Template (1\/8\" Undersized)","offer_id":47622563496155,"sku":"F.C.GENIEACRYLIC","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/Genie_charcuterie.png?v=1758567628"},{"product_id":"13x-11-5x-1-25-heart-charcuterie-board-silicone-mold-serving-board-mold","title":"13\"x 11.5\"x 1.25\" Heart Charcuterie Board Silicone Mold - Serving Board Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eTall: 13\"\u003cbr\u003eWidth: 11.5\"\u003cbr\u003eDeep: 1.25\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Template\u003c\/strong\u003e: Exact size of final casting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinal Cut Template\u003c\/strong\u003e: 1\/8\" undersized to trim excess resin.\u003c\/p\u003e\n\u003cp\u003eThis listing is for a heart shaped serving board silicone mold that has an integrated heart shaped handle hole.\u003c\/p\u003e\n\u003cp\u003eThis listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.\u003c\/p\u003e\n\u003cp\u003eThese versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.\u003c\/p\u003e\n\u003cp\u003eThe final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Silicone Mold","offer_id":47622563332315,"sku":"HEARTCHARCUT","price":95.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Template","offer_id":47622563365083,"sku":"HEARTACRYLIC","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Final Cut Acrylic Template (1\/8\" Undersized)","offer_id":47622563397851,"sku":"F.C.HEARTACRYLIC","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/heart_charcuterie.png?v=1758567632"},{"product_id":"18x-7-4-x-1-25-cleaver-cheese-board-silicone-mold-charcuterie-board-mold","title":"18\"x 7.4\" x 1.25\" Cleaver Cheese Board Silicone Mold, Charcuterie Board Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eLength: 18\"\u003c\/p\u003e\n\u003cp\u003eWidth: 7.4\"\u003c\/p\u003e\n\u003cp\u003eDepth: 1.25\"\u003c\/p\u003e\n\u003cp\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Template\u003c\/strong\u003e: Exact size of final casting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinal Cut Template\u003c\/strong\u003e: 1\/8\" undersized to trim excess resin.\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Cleaver Shaped Cheese Board Silicone Mold.\u003c\/p\u003e\n\u003cp\u003eThis listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.\u003c\/p\u003e\n\u003cp\u003eThese versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.\u003c\/p\u003e\n\u003cp\u003eThe final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Medium - 18\" \/ Silicone Mold","offer_id":47622563627227,"sku":"CLEAVER","price":95.0,"currency_code":"USD","in_stock":true},{"title":"Medium - 18\" \/ Acrylic Template","offer_id":47622563659995,"sku":"CLEAVERACRYLIC","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Medium - 18\" \/ Final Cut Acrylic Template (1\/8\" Undersized)","offer_id":47622563692763,"sku":"F.C.CLEAVERACRYLIC","price":25.0,"currency_code":"USD","in_stock":true},{"title":"XL - 24\" \/ Silicone Mold","offer_id":48579496476891,"sku":"sku-48193216970977","price":165.0,"currency_code":"USD","in_stock":true},{"title":"XL - 24\" \/ Acrylic Template","offer_id":48579496509659,"sku":"sku-48193217003745","price":47.5,"currency_code":"USD","in_stock":true},{"title":"XL - 24\" \/ Final Cut Acrylic Template (1\/8\" Undersized)","offer_id":48579496542427,"sku":"sku-48193217036513","price":47.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/cleaver_1.png?v=1758567631"},{"product_id":"cancer-awareness-ribbon-mold-13-x-8-x-1-25-cancer-ribbon-mold-ribbon-mold","title":"Cancer Awareness Ribbon Mold | 13\" x 8\" x 1.25\" | Cancer Ribbon Mold, Ribbon Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003cbr\u003eHeight: 13\"\u003cbr\u003eWidth: 8.5\"\u003cbr\u003eDepth: 1.25\"\u003cbr\u003eFinish: Glossy\/Shiny\u003cbr\u003e\u003cbr\u003eThis listing is for a Cancer Awareness Ribbon Mold.  \u003cspan\u003eCancer ribbons are meant to show support for individuals with cancer. This piece would make great wall decor or wall hanging.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eSILICONE MOLD CARE INSTRUCTIONS\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":47622562808027,"sku":"CANCER","price":85.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/1_3334b861-6fb3-4df6-a90a-dc3ae67bef44.png?v=1758567631"},{"product_id":"12x-1-25-round-charcuterie-board-silicone-mold-serving-board-mold","title":"12\"x 1.25\" Round Charcuterie Board Silicone Mold - Serving Board Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eTall: 12\"\u003cbr\u003eWidth: 12\"\u003cbr\u003eDeep: 1.25\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Template\u003c\/strong\u003e: Exact size of final casting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinal Cut Template\u003c\/strong\u003e: 1\/8\" undersized to trim excess resin.\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Round Cheese Board Silicone Mold with 1 Integrated Handle. This would make a great Serving Tray too.\u003c\/p\u003e\n\u003cp\u003eThis listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.\u003c\/p\u003e\n\u003cp\u003eThese versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.\u003c\/p\u003e\n\u003cp\u003eThe final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting.\u003c\/p\u003e\n\u003cp\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Silicone Mold","offer_id":47622563823835,"sku":"EMBEDDEDHANDLEROUND","price":95.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Template","offer_id":47622563856603,"sku":"EMBEDDEDHANDLEROUNDACRYLIC","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Final Cut Acrylic Template (1\/8\" Undersized)","offer_id":47622563889371,"sku":"F.C.EMBEDDEDHANDLEROUNDACRYLIC","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/round_embedded_handle_shopify.png?v=1758567632"},{"product_id":"deep-paw-print-tray-mold-7-x-7","title":"Deep Paw Print Tray Mold | 7\" x 7\" |","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLength: 7\"\u003cbr\u003eWidth: 7\"\u003cbr\u003eRim Width: 1\/2\"\u003cbr\u003eRim Height: 1\/2\"\u003cbr\u003eBase Height: 1\"\u003cbr\u003eOverall Height: 1.5\"\u003cbr\u003eAll Edges Rounded\u003cbr\u003eGlossy Finish\u003c\/p\u003e\n\u003cp\u003eThis listing is for a mold to create a Deep Paw Print tray. This mold could work well as a remembrance mold of a favorite pet. It offers room for a collar, pet tag or fur.\u003c\/p\u003e\n\u003cp\u003eAll edges of this tray are rounded giving it a softer look.  You will have up to 1\" of working room underneath the face of the tray.  Our Deep Paw Print Tray Molds will produce a product that is smooth and glossy on all sides!! Inside and Out!!  There will be no lines in your finished product.   Free Layout Template Included.\u003c\/p\u003e\n\u003cp\u003eResin work and photo credit goes @mlcresindesigns\u003c\/p\u003e\n\u003cp\u003ePlease message us with any questions you may have regarding this mold.\u003c\/p\u003e\n\u003cp\u003e**Please note this listing is for the silicone mold ONLY.  \u003c\/p\u003e\n\u003cp\u003eAll molds are handmade and inspected before shipping.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":47622564053211,"sku":"DEEPPAWTRAY","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/DEEP_PAW_TRAY.png?v=1758567643"},{"product_id":"4-x-1-round-coaster-silicone-mold","title":"4\" x 1\" Round Coaster Silicone Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eDiameter: 4\"\u003cbr\u003eThickness: 1\"\u003c\/p\u003e\n\u003cp\u003eResin work done by @resinforareason\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting. \u003c\/p\u003e\n\u003cp\u003ePlease message us with any questions you may have.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":47622564085979,"sku":"CIRC4x1","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/4x1_round_coaster.png?v=1758567643"},{"product_id":"cigar-ashtray-mold-7-x-7-x-1-5","title":"Cigar Ashtray Mold | 7” x 7” x 1.5” |","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eLength: 7”\u003c\/p\u003e\n\u003cp\u003eWidth: 7”\u003c\/p\u003e\n\u003cp\u003eDepth: 1.5”\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis listing is for a Cigar Ashtray Mold. The shape of it is a square. The final product comes out completely shiny.\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":47622564118747,"sku":"CIGARASH","price":95.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/Cigar_ashtray.png?v=1758567643"},{"product_id":"4x4x1-square-coaster-silicone-mold","title":"4\"x4\"x1\" Square Coaster Silicone Mold","description":"\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003e\u003cbr\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eLength: 4\"\u003cbr\u003eWidth: 4\"\u003cbr\u003eThickness: 1\"\u003cbr\u003eSharp Corners\u003cbr\u003eGlossy\/Smooth\/Shiny Top + Sides\u003cbr\u003e\u003cbr\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message  and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":47622564151515,"sku":"SQ4X4X1","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/4x4x1_coaster.png?v=1758567642"},{"product_id":"12-x-1-25-round-charcuterie-board-with-handle-silicone-mold","title":"12\" X 1.25\" Round Charcuterie Board with Handle Silicone Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eDiameter: 12\"\u003cbr\u003eLength with Handle: 15.5\"\u003c\/p\u003e\n\u003cp\u003eDepth: 1.25\"\u003c\/p\u003e\n\u003cp\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Template\u003c\/strong\u003e: Exact size of final casting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinal Cut Template\u003c\/strong\u003e: 1\/8\" undersized to trim excess resin.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis listing is for a Round Charcuterie Board with Handle Silicone Mold.\u003c\/p\u003e\n\u003cp\u003eResin work and photo courtesy of @bupp_woodworks and @rockpaperesin\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.\u003c\/p\u003e\n\u003cp\u003eThese versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.\u003c\/p\u003e\n\u003cp\u003eThe final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Silicone Mold","offer_id":47622565036251,"sku":"CHARCUTERIEROUND","price":95.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Template","offer_id":47622565069019,"sku":"CHARCUTERIEROUNDACRYLIC","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Final Cut Acrylic Template (1\/8\" Undersized)","offer_id":47622565101787,"sku":"F.C.CHARCUTERIEROUNDACRYLIC","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/round_charcuterie_shopify_1.png?v=1758567643"},{"product_id":"4-x-4-75-x-1-hexagon-coaster-mold","title":"4\" X 4.75\" X 1\" Hexagon Coaster Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003cbr\u003eHeight: 4\"\u003cbr\u003eWidth: 4.75\"\u003cbr\u003eDepth: 1\"\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message on Etsy and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":47622564184283,"sku":"HEXCSTR4X1","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/HEXAGON_1_COASTER.png?v=1758567642"},{"product_id":"2-deep-round-silicone-molds-12-sizes","title":"2\" Deep Round Silicone Molds, 12 Sizes","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSIZES AVAILABLE\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eDiameter:\u003c\/strong\u003e\u003cbr\u003e4\"       8\"    \u003cbr\u003e10\"    12\"    \u003cbr\u003e14\"    15\"  \u003cbr\u003e16\"    18\"    \u003cbr\u003e20\"    24\" \u003cbr\u003e30\"   36\"\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDepth:\u003c\/strong\u003e  2\"\u003cbr\u003e\u003cstrong\u003eSurface Finish:\u003c\/strong\u003e Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003eThis listing is for 2\" Deep Round Silicone Molds.  We offer this mold in a variety of sizes.\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"4\"","offer_id":47622565495003,"sku":"CIRC4X2","price":40.0,"currency_code":"USD","in_stock":true},{"title":"8\"","offer_id":47622565527771,"sku":"CIRC8X2","price":55.0,"currency_code":"USD","in_stock":true},{"title":"10\"","offer_id":47622565560539,"sku":"CIRC10X2","price":75.0,"currency_code":"USD","in_stock":true},{"title":"12\"","offer_id":47622565593307,"sku":"CIRC12X2","price":95.0,"currency_code":"USD","in_stock":true},{"title":"14\"","offer_id":47622565626075,"sku":"CIRC14X2","price":115.0,"currency_code":"USD","in_stock":true},{"title":"15\"","offer_id":47622565658843,"sku":"CIRC15X2","price":120.0,"currency_code":"USD","in_stock":true},{"title":"16\"","offer_id":47622565691611,"sku":"CIRC16X2","price":140.0,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":47622565724379,"sku":"CIRC18X2","price":166.0,"currency_code":"USD","in_stock":true},{"title":"20\"","offer_id":47622565757147,"sku":"CIRC20X2","price":194.0,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":47622565789915,"sku":"CIRC24X2","price":255.0,"currency_code":"USD","in_stock":true},{"title":"30\"","offer_id":47622565822683,"sku":"CIRC8X12","price":750.0,"currency_code":"USD","in_stock":false},{"title":"36\"","offer_id":47622565855451,"sku":"CIRC36X2","price":1250.0,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/2_tHICK_ROUNDS_a278f629-062b-4dd7-964c-8907ab64eca0.png?v=1758567643"},{"product_id":"cross-silicone-mold-5-sizes","title":"Cross Silicone Mold | 5 Sizes |","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003e4\" TALL CROSS:  4\" x 2.25\" x 5\/8\" Cavity Width; 3\/4\" Thick\u003cbr\u003e6\" TALL CROSS:  6\" x 3.25\" x 1\" Cavity Width; 1.25\" Thick\u003cbr\u003e9\" TALL CROSS:  9\" x 4 7\/8\" x 1.5\" Cavity Width; 1.25\" Thick\u003cbr\u003e13\" TALL CROSS: 13\" x 7\" x 1.5\" Cavity Width; 1.25\" Thick\u003cbr\u003e20\" TALL CROSS: 20\" X 10\" X 2.5\" Cavity Width; 1.25\" Thick\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSurface Finish:\u003c\/strong\u003e Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Template for 20\" Cross:\u003c\/strong\u003e Exact size of final casting\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Deep Cross Silicone Mold. We are offering this mold in 5 sizes to meet all your needs. \u003c\/p\u003e\n\u003cp\u003eThis listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.\u003c\/p\u003e\n\u003cp\u003eThese versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting. \u003c\/p\u003e\n\u003cp\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"4\" Tall - 3\/4\" Thick Mold","offer_id":47622564217051,"sku":"CROSS4","price":20.0,"currency_code":"USD","in_stock":true},{"title":"6\" Tall - 1.25\" Thick Mold","offer_id":47622564249819,"sku":"CROSS6","price":30.0,"currency_code":"USD","in_stock":true},{"title":"9\" Tall - 1.25\" Thick Mold","offer_id":47622564282587,"sku":"CROSS9","price":45.0,"currency_code":"USD","in_stock":true},{"title":"13\" Tall - 1.25\" Thick Mold","offer_id":47622564315355,"sku":"CROSS13","price":70.0,"currency_code":"USD","in_stock":true},{"title":"20\" Tall - 1.25\" Thick Mold","offer_id":47622564348123,"sku":"CROSS20","price":95.0,"currency_code":"USD","in_stock":true},{"title":"20\" Cross Acrylic Template - Not the Mold","offer_id":47622564380891,"sku":"CROSS20ACRYLIC","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/THIN_CROSS_MOLDS.png?v=1758567642"},{"product_id":"3-deep-round-mold-4-sizes","title":"3\" Deep Round Mold | 4 Sizes |","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eDiameter: 12\", 14\", 18\" or 24\"\u003cbr\u003eDepth: 3\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003cbr\u003e\u003cbr\u003eThis listing is for a Deep Round Molds. We are offering this in 4 sizes - 12\", 14\", 18\" and 24\". All 3\" Deep. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eResin work and photos courtesy of @pkwooddesign and @crystal.seas.art\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting. \u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message  and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"12\"","offer_id":47622564905179,"sku":"ROUND12X3","price":165.0,"currency_code":"USD","in_stock":true},{"title":"14\"","offer_id":47622564937947,"sku":"ROUND14","price":200.0,"currency_code":"USD","in_stock":true},{"title":"18\"","offer_id":47622564970715,"sku":"ROUND18","price":275.0,"currency_code":"USD","in_stock":true},{"title":"24\"","offer_id":47622565003483,"sku":"ROUND24","price":375.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/dEEP_ROUND_4_SIZES.png?v=1758567643"},{"product_id":"18x-5x-1-25-wine-bottle-shaped-charcuterie-board-silicone-mold-cheese-board-mold","title":"18\"x 5\"x 1.25\" Wine Bottle Shaped Charcuterie Board Silicone Mold, Cheese Board Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eHeight: 18\"\u003cbr\u003eWidth: 5\"\u003cbr\u003eDeep: 1.25\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Template\u003c\/strong\u003e: Exact size of final casting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinal Cut Template\u003c\/strong\u003e: 1\/8\" undersized to trim excess resin.\u003c\/p\u003e\n\u003cp\u003eThis listing is for a wine bottle shaped charcuterie mold or cheese board mold.\u003c\/p\u003e\n\u003cp\u003eThis listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.\u003c\/p\u003e\n\u003cp\u003eThese versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.\u003c\/p\u003e\n\u003cp\u003eThe final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Silicone Mold","offer_id":47622564446427,"sku":"WINEBOTTLE","price":95.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Template","offer_id":47622564479195,"sku":"WINEBOTTLEACRYLIC","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Final Cut Acrylic Template (1\/8\" Undersized)","offer_id":47622564511963,"sku":"F.C.WINEBOTTLEACRYLIC","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/wine_bottle_mold_1.png?v=1758567642"},{"product_id":"2-deep-rectangle-silicone-molds-10-sizes","title":"2\" Deep Rectangle Silicone Molds | 10 Sizes |","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003cbr\u003e12\" x 8\" x 2\"\u003cbr\u003e14\" x 9\" x 2\"\u003cbr\u003e16\" x 6\" x 2\"\u003cbr\u003e16\" x 12\" x 2\"\u003cbr\u003e18\" x 8\" x 2\"\u003cbr\u003e18\" x 10\" x 2\"\u003cbr\u003e18\" x 12\" x 2\"\u003cbr\u003e19\" x 14\" x 2\"\u003cbr\u003e24\" x 12\" x 2\"\u003cbr\u003e24\" x 16\" x 2\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for 2\" Deep Rectangle Molds. These molds are ULTRA Quality and Long Lasting!\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message on Etsy and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"12\" x 8\" x 2\"","offer_id":47622564544731,"sku":"12X8X2","price":90.0,"currency_code":"USD","in_stock":true},{"title":"14\" x 9\" x 2\"","offer_id":47622564577499,"sku":"14X9X2","price":110.0,"currency_code":"USD","in_stock":true},{"title":"16\" x 6\" x 2\"","offer_id":47622564610267,"sku":"16X6X2","price":95.0,"currency_code":"USD","in_stock":true},{"title":"16\" x 12\" x 2\"","offer_id":47622564643035,"sku":"16X12X2","price":135.0,"currency_code":"USD","in_stock":true},{"title":"18\" x 8\" x 2\"","offer_id":47622564675803,"sku":"18X8X2","price":125.0,"currency_code":"USD","in_stock":true},{"title":"18\" x 10\" x 2\"","offer_id":47622564708571,"sku":"18X10X2","price":135.0,"currency_code":"USD","in_stock":true},{"title":"18\" x 12\" x 2\"","offer_id":47622564741339,"sku":"18X12X2","price":145.0,"currency_code":"USD","in_stock":true},{"title":"19\" x 14\" x 2\"","offer_id":47622564774107,"sku":"19X14X2","price":175.0,"currency_code":"USD","in_stock":true},{"title":"24\" x 12\" x 2\"","offer_id":47622564806875,"sku":"24X12X2","price":175.0,"currency_code":"USD","in_stock":true},{"title":"24\" x 16\" x 2\"","offer_id":47622564839643,"sku":"24X16X2","price":249.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/2_DEEP_RECTANGLE_ALL.png?v=1758567642"},{"product_id":"deep-round-molds-8-sizes","title":"Deep Round Molds | 8 Sizes |","description":"\u003cp\u003eSIZES AVAILABLE:\u003cbr\u003e3\" X 1.5\"\u003cbr\u003e3\" X 3\"\u003cbr\u003e4\" X 1\"\u003cbr\u003e4\" X 2\"\u003cbr\u003e4\" X 3\"\u003cbr\u003e8\" X 2\"\u003cbr\u003e12\" X 1\"\u003cbr\u003e14\" X 1\"\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"3\" x 1.5\"","offer_id":47622565232859,"sku":"CIRC3X1.5","price":30.0,"currency_code":"USD","in_stock":true},{"title":"3\" x 3\"","offer_id":47622565265627,"sku":"CIRC3X3","price":40.0,"currency_code":"USD","in_stock":true},{"title":"4\" x 1\"","offer_id":47622565298395,"sku":"CIRC4X1","price":30.0,"currency_code":"USD","in_stock":true},{"title":"4\" x 2\"","offer_id":47622565331163,"sku":"CIRC4X2","price":40.0,"currency_code":"USD","in_stock":true},{"title":"4\" x 3\"","offer_id":47622565363931,"sku":"CIRC4X3","price":45.0,"currency_code":"USD","in_stock":true},{"title":"8\" x 2\"","offer_id":47622565396699,"sku":"CIRC8X2","price":55.0,"currency_code":"USD","in_stock":true},{"title":"12\" x 1\"","offer_id":47622565429467,"sku":"CIRC12X1","price":85.0,"currency_code":"USD","in_stock":true},{"title":"14\" x 1\"","offer_id":47622565462235,"sku":"CIRC14X1","price":100.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/deep_ROUNDS_shopify_1.png?v=1758567643"},{"product_id":"deep-round-tray-mold","title":"Deep Round Tray Mold","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eDiameter: 5\"\u003cbr\u003eRim Width: 1\/2\"\u003cbr\u003eRim Height: 1\/2\"\u003cbr\u003eBase Height: 1\"\u003cbr\u003eOverall Height: 1.5\"\u003cbr\u003eAll Edges Rounded\u003cbr\u003e\u003cbr\u003e\u003cbr\u003eThis listing is for a Deep Round Tray Mold. All edges of this tray are rounded giving it a softer look. You will have up to 1\" of working room underneath the face of the tray. This gives you plenty of room for your florals or any other inclusion you would like to add. Our Deep Circle Tray Molds will produce a product that is smooth and glossy on all sides!! Inside and Out!! There will be no lines in your finished product. This is an ULTRA QUALITY MOLD!!\u003cbr\u003e\u003cbr\u003eFree Layout Template Included\u003c\/p\u003e\n\u003cp\u003eResin work and video by @erinssofabulous\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":47622564413659,"sku":"DEEPROUNDTRAY","price":65.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/Deep_round_tray.png?v=1758567643"},{"product_id":"pen-blank-silicone-mold-6x1x1","title":"Pen Blank Silicone Mold | 6\"x1\"x1\" |","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eLength: 6\"\u003cbr\u003eWidth: 1\"\u003cbr\u003eHeight: 1\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003cbr\u003e\u003cbr\u003eSAFE FOR USE IN PRESSURE POT\u003cbr\u003e\u003cbr\u003eThis listing is for a Pen Blank Silicone Mold. The size of the blank is 6\"x1\"x1\". This Pen Blank Mold comes with 5 cavities.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003eDONT TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003eUse scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003eUSE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003eMake sure the resin is full cured. Uncured resin may rip the mold.\u003cbr\u003ePlease follow all safety precautions when using resin. It is very toxic.\u003cbr\u003eIf you have further questions or concerns about your mold, please shoot me a message and I'll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":47622564872411,"sku":"PENBLANK","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/1_8539e24c-468b-46e0-9c5f-1e15ac97fea0.png?v=1758567643"},{"product_id":"17x-7x-1-25-organic-charcuterie-board-silicone-mold","title":"17\"x 7\"x 1.25\" Organic Charcuterie Board Silicone Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eTall: 17\"\u003cbr\u003eWidth: 7\"\u003cbr\u003eDeep: 1.25\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Template\u003c\/strong\u003e: Exact size of final casting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinal Cut Template\u003c\/strong\u003e: 1\/8\" undersized to trim excess resin.\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Charcuterie Board Mold with an organic handle.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eResin work and photos courtesy of @tuzzstable\u003c\/p\u003e\n\u003cp\u003eThis listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.\u003c\/p\u003e\n\u003cp\u003eThese versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.\u003c\/p\u003e\n\u003cp\u003eThe final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Silicone Mold","offer_id":47622566379739,"sku":"CHARCUTERIEORGANIC","price":95.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Template","offer_id":47622566412507,"sku":"CHARCUTERIEORGANICACRYLIC","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Final Cut Acrylic Template (1\/8\" Undersized)","offer_id":47622566445275,"sku":"F.C.CHARCUTERIEORGANICACRYLIC","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/Main.png?v=1758567643"},{"product_id":"2-deep-square-mold-4-sizes","title":"2\" Deep Square Mold | 4 Sizes |","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e4\" x 4\" x 2\"\u003cbr\u003e6\" x 6\" x 2\"\u003cbr\u003e8\" x 8\" x 2\"\u003cbr\u003e10\" x 10\" x 2\"\u003c\/p\u003e\n\u003cp\u003eThis listing is for 2\" deep square molds.  We offer 4 different sizes.  \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"4\" X 4\" X 2\"","offer_id":47622566248667,"sku":"SQ4X4X2","price":40.0,"currency_code":"USD","in_stock":true},{"title":"6\" X 6\" X 2\"","offer_id":47622566281435,"sku":"SQ6X6X2","price":55.0,"currency_code":"USD","in_stock":true},{"title":"8\" X 8\" X 2\"","offer_id":47622566314203,"sku":"SQ8X8X2","price":75.0,"currency_code":"USD","in_stock":true},{"title":"10\" X 10\" X 2\"","offer_id":47622566346971,"sku":"SQ10X10X2","price":90.0,"currency_code":"USD","in_stock":true},{"title":"12\" X 12\" X 2\"","offer_id":48798782783707,"sku":"sku-48391112556769","price":155.0,"currency_code":"USD","in_stock":true},{"title":"14\" X 14\" X 2\"","offer_id":48798782816475,"sku":"sku-48391112589537","price":170.0,"currency_code":"USD","in_stock":true},{"title":"16\" X 16\" X 2\"","offer_id":48798782849243,"sku":"sku-48391112622305","price":195.0,"currency_code":"USD","in_stock":true},{"title":"18\" X 18\" X 2\"","offer_id":48798782882011,"sku":"sku-48391112655073","price":225.0,"currency_code":"USD","in_stock":true},{"title":"20\" X 20\" X 2\"","offer_id":48798782914779,"sku":"sku-48391112687841","price":240.0,"currency_code":"USD","in_stock":true},{"title":"24\" X 24\" X 2\"","offer_id":48798782947547,"sku":"sku-48391112720609","price":295.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/2_deep_square_all_d55f1880-82bc-4086-8d80-79dbfa1d4c30.png?v=1758567642"},{"product_id":"16x-6-5x-1-25-free-flow-charcuterie-board-silicone-mold","title":"16\"x 6.5\"x 1.25\" Free Flow Charcuterie Board Silicone Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eTall: 16\"\u003cbr\u003eWidth: 6.5\"\u003cbr\u003eDeep: 1.25\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Template\u003c\/strong\u003e: Exact size of final casting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinal Cut Template\u003c\/strong\u003e: 1\/8\" undersized to trim excess resin.\u003c\/p\u003e\n\u003cp\u003eThis style charcuterie board mold has a free flow handle.\u003c\/p\u003e\n\u003cp\u003eListing video and photo courtesy of @jaredcoreyconcepts\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eThis listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.\u003c\/p\u003e\n\u003cp\u003eThese versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.\u003c\/p\u003e\n\u003cp\u003eThe final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Silicone Mold","offer_id":47622565134555,"sku":"CHARCUTERIEFREE","price":95.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Template","offer_id":47622565167323,"sku":"CHARCUTERIEFREEACRYLIC","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Final Cut Acrylic Template (1\/8\" Undersized)","offer_id":47622565200091,"sku":"F.C.CHARCUTERIEFREEACRYLIC","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/free_flow_charcuterie_1.png?v=1758567643"},{"product_id":"deep-pill-tray-mold","title":"Deep Pill Tray Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003eLength: 7.5\"\u003cbr\u003eWidth: 4.5\"\u003cbr\u003eRim Width: 1\/2\"\u003cbr\u003eRim Height: 1\/2\"\u003cbr\u003eBase Height: 1\"\u003cbr\u003eOverall Height: 1.5\"\u003cbr\u003eAll Edges Rounded\u003cbr\u003e\u003cbr\u003e\u003cbr\u003ePerfect for Promise Deep Pour. This listing is for a Deep Pill Tray Mold. All edges of this tray will be rounded giving it a softer look. You will have up to 1\" of working room underneath the face of the tray. This gives you plenty of room for your florals or any other inclusion you would like to add. Our Deep Pill Tray Molds will produce a product that is smooth and glossy on all sides!! Inside and Outside!! There will be no lines in your finished product. \u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eResin Work and Photos by @kanetahale\u003cbr\u003e\u003cbr\u003eFree Layout Template Included\u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Default Title","offer_id":47622566215899,"sku":"DEEPPILL","price":75.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/Deep_pill.png?v=1758567643"},{"product_id":"1-deep-rectangle-silicone-mold-8-sizes","title":"1\" Deep Rectangle Silicone Mold | 8 SIZES |","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cdiv\u003e10\" x 4\" x 1\"\u003cbr\u003e17\" x 4\" x 1\"\u003cbr\u003e21\" x 4\" x 1\"\u003cbr\u003e14\" x 8\" x 1\"\u003cbr\u003e16\" x 6\" x 1\"\u003cbr\u003e16\" x 12\" x 1\"\u003cbr\u003e18\" x 9\" x 1\"\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003e36\" x 12\" x 1\"\u003cbr\u003e\n\u003c\/div\u003e\n\u003cdiv\u003eSurface Finish: Smooth\/Glossy\u003c\/div\u003e\n\u003cdiv\u003e\u003cbr\u003e\u003c\/div\u003e\n\u003cp\u003eThis listing is for 1\" Deep Rectangle Molds.  There are 8 different sizes available. These molds are ULTRA Quality and Long Lasting!\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"1\" x 1\" x 1\"","offer_id":47900177989851,"sku":"sku-47381447213281","price":12.5,"currency_code":"USD","in_stock":true},{"title":"2\" x 2\" x 1\"","offer_id":47900178022619,"sku":"sku-47381447246049","price":17.5,"currency_code":"USD","in_stock":true},{"title":"3\" x 3\" x 1\"","offer_id":47900178055387,"sku":"sku-47381447278817","price":25.0,"currency_code":"USD","in_stock":true},{"title":"4\" x 4\" x 1\"","offer_id":47900178088155,"sku":"sku-47381447311585","price":30.0,"currency_code":"USD","in_stock":true},{"title":"5\" x 5\" x 1\"","offer_id":47900178120923,"sku":"sku-47381447344353","price":35.0,"currency_code":"USD","in_stock":true},{"title":"6\" x 6\" x 1\"","offer_id":47904140886235,"sku":"sku-47391240028385","price":40.0,"currency_code":"USD","in_stock":true},{"title":"8\" x 8\" x 1\"","offer_id":47904140919003,"sku":"sku-47391240061153","price":55.0,"currency_code":"USD","in_stock":true},{"title":"9\" x 9\" x 1\"","offer_id":47904140951771,"sku":"sku-47391240093921","price":65.0,"currency_code":"USD","in_stock":true},{"title":"10\" x 10\" x 1\"","offer_id":47904140984539,"sku":"sku-47391240126689","price":75.0,"currency_code":"USD","in_stock":true},{"title":"10\" x 4\" x 1\"","offer_id":47622566478043,"sku":"10X4X1","price":40.0,"currency_code":"USD","in_stock":true},{"title":"17\" x 4\" x 1\"","offer_id":47622566510811,"sku":"17X4X1","price":65.0,"currency_code":"USD","in_stock":true},{"title":"21\" x 4\" x 1\"","offer_id":47622566543579,"sku":"21X4X1","price":75.0,"currency_code":"USD","in_stock":true},{"title":"9\" x 6\" x 1","offer_id":47900178153691,"sku":"sku-47381447377121","price":51.0,"currency_code":"USD","in_stock":true},{"title":"10\" x 8\" x 1\"","offer_id":47900178186459,"sku":"sku-47381447409889","price":72.0,"currency_code":"USD","in_stock":true},{"title":"12\" x 8\" x 1\"","offer_id":47900178219227,"sku":"sku-47381447442657","price":82.0,"currency_code":"USD","in_stock":true},{"title":"14\" x 8\" x 1\"","offer_id":47622566576347,"sku":"14X8X1","price":87.5,"currency_code":"USD","in_stock":true},{"title":"14\" x 9\" x 1\"","offer_id":47900178251995,"sku":"sku-47381447475425","price":95.0,"currency_code":"USD","in_stock":true},{"title":"14\" x 11\" x 1\"","offer_id":47900178284763,"sku":"sku-47381447508193","price":108.0,"currency_code":"USD","in_stock":true},{"title":"15\" x 5\" x 1\"","offer_id":47900178317531,"sku":"sku-47381447540961","price":70.0,"currency_code":"USD","in_stock":true},{"title":"16\" x 6\" x 1\"","offer_id":47622566609115,"sku":"16X6X1","price":75.0,"currency_code":"USD","in_stock":true},{"title":"16\" x 12\" x 1\"","offer_id":47622566641883,"sku":"16X12X1","price":115.0,"currency_code":"USD","in_stock":true},{"title":"18\" x 8\" x 1\"","offer_id":47900178350299,"sku":"sku-47381447573729","price":104.0,"currency_code":"USD","in_stock":true},{"title":"18\" x 9\" x 1\"","offer_id":47622566674651,"sku":"18X9X1","price":110.0,"currency_code":"USD","in_stock":true},{"title":"36\" x 12\" x 1\"","offer_id":47622566707419,"sku":"36X12X1","price":275.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/1_deep_rectangles_all_1.png?v=1758567643"},{"product_id":"18x-12x-1-25-rectangle-cheese-board-silicone-mold-dual-handles","title":"18\"x 12\"x 1.25\" Rectangle Cheese Board Silicone Mold, Dual Handles","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eHeight: 18\"\u003cbr\u003eWidth: 12\"\u003cbr\u003eDeep: 1.25\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Template\u003c\/strong\u003e: Exact size of final casting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinal Cut Template\u003c\/strong\u003e: 1\/8\" undersized to trim excess resin.\u003c\/p\u003e\n\u003cp\u003eThis listing is for a Rectangle with Embedded Dual Handles Charcuterie Board Mold.\u003c\/p\u003e\n\u003cp\u003eThis listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.\u003c\/p\u003e\n\u003cp\u003eThese versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.\u003c\/p\u003e\n\u003cp\u003eThe final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Silicone Mold","offer_id":47622565888219,"sku":"RECTANGLEDUALHANDLE","price":135.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Template","offer_id":47622565920987,"sku":"RECTANGLEDUALHANDLEACRYLIC","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Final Cut Acrylic Template (1\/8\" Undersized)","offer_id":47622565953755,"sku":"F.C.RECTANGLEDUALHANDLEACRYLIC","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/rectangle_mold.png?v=1758567642"},{"product_id":"coaster-molds-7-shapes-4-inch-coaster-molds-for-resin","title":"Coaster Molds | 7 Shapes | 4 Inch Coaster Molds for Resin","description":"\u003cp\u003e\u003cstrong\u003eFINAL CAST DIMENSIONS\u003c\/strong\u003e\u003cbr\u003eSize: Approx. 4\"\u003cbr\u003eDepth: 1\/2\"\u003cbr\u003e\u003cbr\u003eWe are offering this in 7 shapes: Round, Square, 4 unique Geode shapes and Hexagon. \u003cbr\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY. \u003cbr\u003e\u003cbr\u003eAll molds are handmade and inspected before shipping.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/span\u003e\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Round","offer_id":47622565986523,"sku":"ROUNDCOASTER","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Square","offer_id":47622566019291,"sku":"SQUARECOASTER","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Hexagon","offer_id":47622566052059,"sku":"HEXAGONCOASTER","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Geode 1","offer_id":47622566084827,"sku":"GEODECSTR1","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Geode 2","offer_id":47622566117595,"sku":"GEODECSTR2","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Geode 3","offer_id":47622566150363,"sku":"GEODECSTR3","price":17.5,"currency_code":"USD","in_stock":true},{"title":"Geode 4","offer_id":47622566183131,"sku":"GEODECSTR4","price":17.5,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/COASTER_MOLDS.png?v=1758567642"},{"product_id":"16-x7-x1-25-flared-handle-charcuterie-board-silicone-mold","title":"16”x7”x1.25” Flared Handle Charcuterie Board Silicone Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr\u003eTall: 16\"\u003cbr\u003eWidth: 7\"\u003cbr\u003eDeep: 1.25\"\u003cbr\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Template\u003c\/strong\u003e: Exact size of final casting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinal Cut Template\u003c\/strong\u003e: 1\/8\" undersized to trim excess resin.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eThis listing is for a Charcuterie Board Mold. This style has the flared handle and a rectangle shaped body. \u003c\/p\u003e\n\u003cp\u003eThis listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.\u003c\/p\u003e\n\u003cp\u003eThese versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.\u003c\/p\u003e\n\u003cp\u003eThe final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting.\u003c\/p\u003e\n\u003cp\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please send me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Silicone Mold","offer_id":47622566740187,"sku":"CHAR-REC-FLARED","price":95.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Template","offer_id":47622566772955,"sku":"CHAR-REC-FLARED-ACRYLIC","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Final Cut Acrylic Template (1\/8\" Undersized)","offer_id":47622566805723,"sku":"F.C.CHAR-REC-FLARED-ACRYLIC","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/Flared_rectangle_charcuterie.png?v=1758567643"},{"product_id":"paper-weight-molds-9-shapes-baby-molds-pocket-collection-molds","title":"Paper Weight Molds | 9 Shapes | Baby Molds, Pocket Collection Molds","description":"\u003cp\u003e\u003cstrong\u003e\u003cspan\u003eFINAL CAST DIMENSIONS:\u003c\/span\u003e\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eHeight of all Shapes: 3.5\". \u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eWidth: Varies according to shape\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eDepth: 1.25\"\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003eFinish: Glossy\u003c\/span\u003e\u003cspan\u003e\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cspan\u003e\u003cbr\u003e\u003cstrong\u003eSHAPES AVAILABLE:\u003c\/strong\u003e\u003cbr\u003eArch\u003cbr\u003eBook Ends\u003cbr\u003eHeart\u003cbr\u003eHexagon\u003cbr\u003eRainbow\u003cbr\u003eRectangle\u003cbr\u003eSquare\u003cbr\u003eStanding Oval\u003cbr\u003eStanding Round\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting. \u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003ePlease message us with any questions you may have regarding this mold.\u003cbr\u003e\u003cbr\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003c\/span\u003e\u003cbr\u003e\u003cspan\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003c\/span\u003e\u003cbr\u003e\u003cbr\u003e\u003cspan\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/span\u003e\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Arch","offer_id":47622566838491,"sku":"BABYARCH","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Book Ends","offer_id":47622566871259,"sku":"BABYBOOKENDS","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Heart","offer_id":47622566904027,"sku":"BABYHEART","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Hexagon","offer_id":47622566936795,"sku":"BABYHEX","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Rainbow","offer_id":47622566969563,"sku":"BABYRAINBOW","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Rectangle","offer_id":47622567002331,"sku":"BABYRECTANGLE","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Square","offer_id":47622567035099,"sku":"BABYSQUARE","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Standing Oval","offer_id":47622567067867,"sku":"BABYOVAL","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Standing Round","offer_id":47622567100635,"sku":"BABYROUND","price":30.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/paper_weight_aec0fc2b-7f00-43a1-80ee-0cb624dcbfc6.png?v=1758567644"},{"product_id":"22-x-6-x-1-25-large-bowed-rectangle-with-dual-handles-silicone-mold","title":"22\" X 6\" X 1.25\" Large Bowed Rectangle with Dual Handles Silicone Mold","description":"\u003cp\u003e\u003cstrong\u003eFinal Cast Dimensions:\u003c\/strong\u003e\u003cbr data-mce-fragment=\"1\"\u003eLength: 22\"\u003cbr data-mce-fragment=\"1\"\u003eWidth: 6\"\u003cbr data-mce-fragment=\"1\"\u003eDeep: 1.25\"\u003cbr data-mce-fragment=\"1\"\u003eSurface Finish: Smooth\/Shiny\/Glossy\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAcrylic Template\u003c\/strong\u003e: Exact size of final casting\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFinal Cut Template\u003c\/strong\u003e: 1\/8\" undersized to trim excess resin.\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003eThis listing is for a Large Bowed Rectangle Silicone Mold. This style has dual embedded handles. \u003c\/p\u003e\n\u003cp\u003eThis listing features an optional precision laser-cut acrylic router template, designed to be the simplest, most accurate, and repeatable solution for shaping wood or wood-resin pieces into charcuterie boards, serving trays, handles, functional art, and more.\u003c\/p\u003e\n\u003cp\u003eThese versatile templates allow you to either trace the pattern for rough-cutting or use them directly with a flush trim router bit for clean, precise shaping. It's an essential woodworking tool that streamlines your workflow, reducing production time while maintaining accuracy and consistency.\u003c\/p\u003e\n\u003cp\u003eThe final cut template allows you to take your casting out of the mold and flush trim any resin that seeped around the wood. This speeds up production time and reduces post sanding work.\u003c\/p\u003e\n\u003cp\u003eWe suggest using mold release to extend the life of your silicone mold. It is not needed, it is recommended. We suggest Ease Release 200. Please note that mold release does affect the surface finish by removing the glossy surface on the mold. It will make the mold surface finish satin\/matte which directly transfers to your casting.\u003c\/p\u003e\n\u003cp\u003e\u003cbr data-mce-fragment=\"1\"\u003ePlease message us with any questions you may have regarding this mold.\u003cbr data-mce-fragment=\"1\"\u003e\u003cbr data-mce-fragment=\"1\"\u003e**Please note this listing is for the silicone mold ONLY.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003eOur silicone molds cure to a strong platinum rubber which is tear resistant and exhibits very low long-term shrinkage. Our molds will last a long time in your mold library and are good for resin, concrete, wax, gypsum and other materials. The molds are heat resistant up to 450 degrees Fahrenheit or 232 degrees Centigrade. They are suitable for casting low temperature melt metal alloys.\u003cbr\u003e\u003cbr\u003e\u003cstrong\u003eSILICONE MOLD CARE INSTRUCTIONS\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e• DON’T TOUCH the inside shiny part of the mold. This will cause permanent scuffs that will show in your final cast.\u003cbr\u003e• Use scotch tape to gently clean the mold. Tap the spot lightly where there are loose particles.\u003cbr\u003e• USE EXTREME CAUTION when using a torch\/heat gun to pop bubbles in the resin. It may rip the mold upon demolding your fully cured resin. Instead try a mist of alcohol over the resin.\u003cbr\u003e• Make sure the resin is fully cured. Uncured resin may rip the mold.\u003cbr\u003e• Please follow all safety precautions when using resin. It is very toxic.\u003cbr\u003e• If you have further questions or concerns about your mold, please shoot me a message and I’ll get you taken care of.\u003cbr\u003e\u003cbr\u003ePLEASE INSPECT MOLD PRIOR TO FIRST USE. I DO NOT ACCEPT RETURNS OF USED MOLDS.\u003c\/p\u003e","brand":"Zapp3D Design LLC","offers":[{"title":"Silicone Mold","offer_id":47622567133403,"sku":"22X6BOWEDREC","price":135.0,"currency_code":"USD","in_stock":true},{"title":"Acrylic Template","offer_id":47622567166171,"sku":"BOWEDRECACRYLIC","price":25.0,"currency_code":"USD","in_stock":true},{"title":"Final Cut Acrylic Template (1\/8\" Undersized)","offer_id":47622567198939,"sku":"F.C.BOWEDRECACRYLIC","price":25.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0677\/5337\/8011\/files\/bowed_rectangle_5bd4530d-dd2e-450c-a0e0-5a6e0864f507.png?v=1758567643"}],"url":"https:\/\/promiseepoxy.com\/collections\/resin-molds.oembed","provider":"Promise Epoxy","version":"1.0","type":"link"}